before you begin to tackle your garage door repair DIY, ensure you have some tools: winding bars, wrenches, vice grips and one with a square head. Make sure you wear safety glasses. The YouTube video “Garage Door Springs How to Video …,” provides the necessary procedures involved in carrying out the DIY garage door repairs.

The first step is to remove the tension from the garage door with the wrench. Following that, release the bolt off the spring. Use your winding bars to relieve the pressure until it is zero. After tension has been removed, remove the bolt out of the central cone.

Then, take the key that is on top of the broken spring. Next, you can loosen both sides of the spring and then slide the keys away. Replace the old springs by sliding the new springs. Be sure to place your springs correctly.

After you’ve finished, put the torso in your central bearings. For doors up to seven feet tall, spin the door for 30 turns. For doors that are eight feet high, wind the cable up to 34 turns. After that, take the cable and place it into the line of the slot. After you have removed the winding bars, check your door’s stability. It should be simple to raise. h3bxj2gagb.